MaineConcrete Calculator — Yards, Bags & Cost

Maine Concrete Calculator — What You Need to Know

Maine's concrete environment is defined by three dominant factors: extreme frost depth, remote rural delivery, and coastal saltwater exposure. Aroostook County in northern Maine has frost depths up to 72 inches — the deepest in the continental United States outside Alaska — requiring the longest footings of any state. Southern Maine (Portland, Biddeford) starts at 48 inches, still significantly deeper than most of the country. 4,000 PSI with 5–7% air entrainment is the absolute minimum for all Maine exterior concrete — Maine's 40–70 annual freeze-thaw cycles combined with road salt will destroy improperly specified concrete within 2–4 years. Maine Building Code is based on the IBC with state amendments, administered through the Maine Department of Public Safety, Building Codes and Standards Division. Contractor licensing is managed by the Maine Department of Professional and Financial Regulation at maine.gov/pfr.

How to Calculate Concrete Volume in Maine

Measure your project length and width in feet and depth in inches. Multiply length x width x (depth / 12) for cubic feet, then divide by 27 for cubic yards. Maine's 5 inch minimum driveway thickness (vs 4 inches in southern states) means ME volume runs about 25% higher per square foot than warm-climate equivalents. For camp foundations on irregular wooded lots, divide the perimeter into rectangles and sum volumes. Always add 10% minimum waste — use 15% for ledge rock sites where subgrade depth varies, and 20% for remote Aroostook or coastal marsh locations where delivery and access challenges increase waste risk.

Maine Concrete Pricing — Current Reference

Maine's ready-mix market is above the national average driven by cold-climate mix premiums, low population density, and long delivery distances. Portland and the southern ME coast have the most competitive pricing. Augusta, Bangor, and Lewiston-Auburn are moderately priced. The further north and inland you go — Aroostook County, Piscataquis, northern Somerset — the higher the per-yard price climbs due to fewer plant locations and longer haul distances. Remote camp sites across Maine regularly see $30–$60/yd delivery surcharges beyond standard plant pricing.

Maine Concrete Cost by Region

Maine pricing divides across six key regions. Portland and southern coastal ME offer the most competitive ready-mix pricing. Augusta, Bangor, and Lewiston-Auburn are moderately priced. The further north and inland the project, the higher the cost — Aroostook County is the most expensive region in Maine, regularly running $40–$60/yd above Portland metro pricing for the same mix specification.

Maine Concrete Project Tips

• 4,000 PSI with 5-7% air entrainment is non-negotiable for all ME exterior concrete — Maine roads are heavily salted from November through April. Any exterior concrete without proper air entrainment will begin to spall and delaminate within 2-4 years. Never accept 3,000 or 3,500 PSI non-air-entrained concrete for any Maine driveway, patio, sidewalk, or garage floor.
• Know your frost depth before designing any ME footing — Maine frost depths range from 48 inches in Portland to 72 inches in Fort Kent. Always confirm the required footing depth with your local town or city building department before any design. Aroostook County footings require the deepest concrete work in the continental US and budget significantly more material per linear foot of footing than any other state.
• Assess for ledge rock before any site work begins — Maine's granite bedrock is close to the surface across coastal areas, western mountains, and much of the interior. Commission a test pit or probe survey before budgeting any concrete job. Ledge removal adds $8–$25/sq ft to site preparation costs. On confirmed ledge sites, get a licensed engineer to certify that bearing on rock surface meets structural requirements before pouring footings.
• All ME camp and lake home foundations must reach full frost depth — Maine Building Code requires full perimeter footings to frost depth for all structures regardless of seasonal use. There are no seasonal-use exemptions. A Rangeley or Moosehead Lake camp requires footings to 60+ inches just as a year-round home does. Budget accordingly and confirm with your local town office before designing camp foundations.
• Coastal ME concrete requires enhanced specifications — within 500 feet of tidal water, use 4,000-4,500 PSI minimum with supplementary cementing materials (30% fly ash or 40% slag replacement), epoxy-coated or stainless steel rebar, minimum 2 inch cover, and a silane or siloxane sealer applied after 28-day cure. Maine's rocky coast with tidal spray creates one of the most aggressive concrete exposure environments in the northeastern US.
• Never pour ME concrete on frozen subgrade — frozen ground under a freshly poured slab will thaw and settle in spring, causing catastrophic cracking. In Aroostook and northern ME, ground frost can persist below the surface into late June. Use a soil temperature probe and confirm ground temperature above 32F at full footing depth before any pour. This is especially critical for camp foundations poured in late spring after a long northern Maine winter.
• Use crushed gravel base per Maine DOT specification — Maine DOT specifies crushed gravel (not sand) as the base material for all flatwork. Use 6 inches minimum, compacted to 95% Modified Proctor density. This freely draining base prevents frost heave beneath Maine's heavily frozen winter soils. On soft or organic subgrades (common near lakeshores), increase base depth to 8-12 inches or use geotextile fabric before base placement.
• Install contraction joints at 8-10 ft spacing in both directions — Maine's temperature range from -30F in Aroostook to 90F summer creates extreme thermal cycling. Saw-cut or tooled joints at 8-10 ft spacing in both directions are essential to control shrinkage cracking. Saw-cut within 6-12 hours of pour completion to prevent random cracking before joints are established. Seal all joints with a flexible polyurethane or silicone sealant to prevent water and salt infiltration.